Recommended Mounting And Dismounting Fluid - SKF 729101/300MPA Mode D'emploi

5. Recommended mounting and dismounting fluid

SKF mounting fluid
SKF LHMF 300/5 mounting fluid is recommended when mounting shrink-fitted
components with the SKF oil injection method.
The mounting fluid is recommended for use at a temperature of 18... 25 °C (64... 77 °F).
The fluid contains anti-corrosive additives.
SKF dismounting fluid
SKF LHDF 900/5 dismounting fluid is recommended when dismounting shrinkfitted
components with the SKF oil injection method.
The dismounting fluid should be used at a temperature of 18... 25 °C (64... 77 °F).
The fluid contains anti-corrosive additives.
Due to the high viscosity of the fluid it might be necessary to operate the pump slowly.
Oil cleanliness requirements
Dirt and metal particles in the oil can cause wear of the piston mating surfaces, leading to
excessive oil leakage and permanent damage.
The recommended oil cleanliness level should meet or exceed ISO 4406:1999 20/18/15.
Using fluids, other than oils or SKF mounting and dismounting fluids, can cause corrosion
and/or damage to the piston mating surfaces. Do not mix fluids or oils of different brands.
14 SKF 729101