Proper Use - Pentatech BASIC 3000 SET F2 Instructions D'utilisation

GB
1. Introduction
Read through this user manual completely and carefully. The user manual is
an integral part of the product and contains important information about
operation and handling. Always observe all the safety instructions. If you
have any questions or are unsure about using the equipment, ask a specialist
or obtain information on line at www.pentatech.de. Keep this manual in a
safe place and pass it on to third parties if necessary.

2. Proper use

The wireless Alarm System 3000 Set F2 consists of the indoor siren 3000I2S,
a wireless-PIR-detector 3000P2, a wireless door/window contact 3000M
and two remote controls 3000R.
The wireless PIR-detector serves to monitor interior rooms. It detects
movement of warm objects (eg. persons) day and night. Upon detection it
sends a wireless signal to the siren. The PIR-detector 3000P2 with teo
sensors in the 3000 Set F2 does not react to smaller pets with a weight of
max. 25 kg.
The wireless door/window contact serves to monitor doors and windows.
When a monitored door or window is opened the unit sends a wireless signal
to the siren.
The siren receives the alarm signals from the detectors and if it is armed the
siren warns acoustically and visually (flashes).
The system is armed and disarmed using the remote control 3000R. An
alarm can be manually activated by pressing the panic button.
It is possible to partially arm the system. In this case certain detectors can be
deactivated when the dwelling is occupied. Detectors in entrance/exit area
can operate with a delay, in order to allow comfortable operation of the
system.
The system can be extended by adding optional accessories. Up to 5 remote
controls 3000R and a total of 20 detectors (3000P or 3000M) can be
enrolled to thr siren.
The 3000 Set F3 can be combined with the GSM-Wireless alarm system
3000 Set F4.
The power supply
! of the siren 3000IS2 with Euro plug is by connecting it to a 230 V AC,
50Hz mains outlet
! of the remote control 3000R is through the delivered lithium battery
CR2025
! of the PIR-detector 3000P is through two alkaline 1.5 V AA (LR6)
batteries (not included)
! of the door/window contact 3000M is through one alkaline 1.5 V AA
(LR6) battery (not included)
The components are for indoor use in private households.
Any other use or modification of the equipment is not authorised and
presents significant risks of accident. No liability will be accepted for
26
consequential damages or for damages caused by improper use or incorrect
operation.
This equipment is not suitable for use by persons (including children) with
limited physical, sensory, or mental abilities or with lacking experience or
lacking knowledge unless they are supervised by a person responsible for
their safety or obtain instructions on how to use the equipment. Children
must be supervised to make sure they do not play with the equipment.
3. Package contents (see Fig. A, B, C, D, E)
! siren 3000IS2 with
! 2x remote control 3000R including battery
! PIR detector 3000P2 with bracket and ball joint
! 2 screws with wall plug for fixing the PIR detector
! door/window contact 3000M (magnet and sensor)
! adhesive pads for magnet and sensor
! user manual
4. Description
Siren 3000IS2 (see Fig. A)
1 indoor siren
2 button
3 LED
Remote control 3000R (see Fig. B)
4 remote control
5 LED
6 disarm button
7 panic button
8 part arm button
9 key ring
10 arm button
11 battery
12 fixing hole
PIR-detector 3000P2 (see Fig. C)
13 PIR-detector
14 LED
15 fresnel lens
16 slot for bracket
17 test button
18 battery compartment lid
19 clip
20 screw hole
21 screw
22 bracket
23 fixing hole
24 wall plate
25 ball joint
26 screw