Service Data; Installation - Zanussi ZOP27901XE Notice D'utilisation

Problem
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

WARNING!
Refer to Safety chapters.
www.zanussi.com
Possible cause
The demo mode is activated.
We recommend that you write the data here:
1. Deactivate the oven.
2. Press and hold the button
3. The first digit on the display
4. Enter the code 2468 by
5. The next digit starts to blink.
6. Demo mode deactivates
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
.
and Demo indicator start to
blink.
pressing the buttons
to change the values and
press to confirm.
when you confirm the last
digit and the code is correct.
or
23