Energy efficiency
Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Number of cavities
Heat source
Volume
Type of oven
Mass
EN 60350-1 - Household electric cooking
appliances - Part 1: Ranges, ovens, steam
ovens and grills - Methods for measuring
performance.
Energy saving
The appliance contains features
which help you save energy during
everyday cooking.
General hints
Make sure that the oven door is closed properly
when the appliance operates and keep it closed
as much as possible during the cooking.
Use metal dishes to improve energy saving.
When possible, do not preheat the oven before
you put the food inside.
When the cooking duration is longer than 30
minutes, reduce the oven temperature to
minimum 3 - 10 minutes before the end of the
cooking time, depending on the duration of the
cooking. The residual heat inside the oven will
continue to cook.
Use the residual heat to warm up other dishes.
Cooking with fan
When possible, use the cooking functions with
fan to save energy.
www.zanussi.com
Zanussi
ZOP27901XE
81.0
A+
0.93 kWh/cycle
0.68 kWh/cycle
1
Electricity
68 l
Built-In Oven
32.8 kg
Residual heat
If a programme with the Duration or End Time
selection is activated and the cooking time is
longer than 30 minutes, the heating elements
deactivate automatically 10% faster in some
oven functions.
The fan and lamp continue to operate.
Keep food warm
Choose the lowest possible temperature setting
to use residual heat and keep a meal warm. The
display shows the residual heat indicator or
temperature.
Moist Fan Baking
Function designed to save energy during
cooking. It operates in such a way that the
temperature in the oven cavity may differ from
the temperature indicated on the display during
a cooking cycle and cooking times may be
different from the cooking times in other
programmes.
When you use Moist Fan Baking, the lamp
automatically deactivates after 30 seconds. You
may activate the lamp again but this action will
reduce the expected energy savings.
25