Preparing The Commissioning Procedure - Lenze 9300 Série Instructions De Montage

6.2

Preparing the commissioning procedure

For commissioning with a keypad you require:
An EMZ9371BCkeypad
ƒ
For commissioning with a PC you require:
A computer with a Windows® XP operating system
ƒ
The Lenze PC software »Global Drive Control (GDC)«
ƒ
A connection to the controller via an interface:
ƒ
Controller
Interface
Integrated system bus or
a CANopen EMF2175IB
communication module
EMF2102IBCV001 LECOM-A/B
communication module
EMF2102IBCV003
LECOM−LIcommunication module
Furthermore you require:
The system manual for the controller used
ƒ
If required, the communication manual (KHB) for the network of the automation
ƒ
platform
Mains voltage or 24 V voltage supply for the control electronics of the controller
ƒ
Follow the instructions of the software and/or read the documentation.
EDKVS9332X DE/EN/FR 4.0
Preparing the commissioning procedure
Connection PC
PC adapter
System bus cable (is EMF2173IB system bus adapter
enclosed with the
system bus
EMF2177IBsystem bus adapter
adapters)
Serial cable For LECOM−B the following is
required:
EWL0020
l A standard RS232/RS485
EWL0021
converter
l
A RS485 connection cable
Optical fibre Optical fibre adapter
EWZ0006 EMF2125IB
EWZ0007 EMF2126IB
l
Final works
Interface
Parallel
USB
Serial (RS232)
6
203