Safety Instructions; General Safety And Application Notes For Lenze Controllers - Lenze 9300 Série Instructions De Montage

2

Safety instructions

2.1

General safety and application notes for Lenze controllers

(in accordance with Low−Voltage Directive 2006/95/EC)
For your personal safety
Disregarding the following safety measures can lead to severe injury to persons and
damage to material:
Only use the product as directed.
ƒ
Never commission the product in the event of visible damage.
ƒ
Never commission the product before assembly has been completed.
ƒ
Do not carry out any technical changes on the product.
ƒ
Only use the accessories approved for the product.
ƒ
Only use original spare parts from Lenze.
ƒ
Observe all regulations for the prevention of accidents, directives and laws
ƒ
applicable on site.
Transport, installation, commissioning and maintenance work must only be carried
ƒ
out by qualified personnel.
– Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or
DIN VDE 0110 and all national regulations for the prevention of accidents.
– According to the basic safety information, qualified, skilled personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of
the product and who have the qualifications necessary for their occupation.
Observe all specifications in this documentation.
ƒ
– This is the condition for safe and trouble−free operation and the achievement of
the specified product features.
– The procedural notes and circuit details described in this documentation are only
proposals. It is up to the user to check whether they can be transferred to the
particular applications. Lenze Automation GmbH does not accept any liability for
the suitability of the procedures and circuit proposals described.
Lenze controllers (frequency inverters, servo inverters, DC speed controllers) and the
ƒ
accessory components can include live and rotating parts − depending on their type
of protection − during operation. Surfaces can be hot.
– Non−authorised removal of the required cover, inappropriate use, incorrect
installation or operation create the risk of severe injury to persons or damage to
material assets.
– For more information, please see the documentation.
High amounts of energy are produced in the controller. Therefore it is required to
ƒ
wear personal protective equipment (body protection, headgear, eye protection, ear
protection, hand guard).
EDKVS9332X DE/EN/FR 4.0
General safety and application notes for Lenze controllers
l
Safety instructions 2
113