Installation; Boiler Fixing; Fuel Supply - Riello Gulliver BLU BGK1 Manuel D'entretien

3. INSTALLATION

THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL STANDARDS.

3.1 BOILER FIXING

Put on the flange (1) the screw and two nuts (see fig. 3).
Widen, if necessary, the insulating gasket holes (5) (see fig. 4).
Fix the flange (1) to the boiler door (4) using screws (2) and (if necessary) the nuts (3) interposing the
insulating gasket (5) (see fig. 2).
Fig. 2
Fig. 3

3.2 FUEL SUPPLY

The burner is designed to allow entry of the oil supply pipes on either side.
Depending on the oil supply pipes position (to the right or to the left hand side of the burner) the fixing plate
(1) and closing plate (2) should be reversed (see fig. 5).
1
2513
IMPORTANT
Boiler door must have a max. thickness of 80 mm for
BGK1 and 90 mm for BGK2, refractory linig included.
Fig. 5
2 2
D5709
3 GB
S7367
D5012
Fig. 4
1