7.2
Putting out of operation
Turn off the scanner using the "Shutdown" button in the desktop Start menu or the
operating On/Off button at the front.
NOTE
If the unit is not to be operated for longer periods:
·
Turn off the rear mains AC switch.
·
Unplug the mains connecting cable.
·
Clean the scan chamber.
·
Close the front door.
·
Cover the scanner with the enclosed dust cover to prevent accumulation of dust inside.
7.3
System configuration
Every time cara Scan 4.0 application is started, a check is performed in order to verify the
software and hardware settings. If an error is detected, the dialog box of the
Configuration Control Panel will be shown.
Depending on the errors detected, some items will be active:
W19641_REF_66069511_13_QSG_02GB_caraScan4.0_V02
© 2018 Kulzer GmbH
Operations
15