Cleaning The Flue - Flue Connection - Anselmo Cola TERMOPLUS 23 Manuel D'installation, D'utilisation Et D'entretien

5.7 Cleaning the flue - flue connection

The flue connection must be cleaned at least once a year or whenever necessary.
Cleaning requires the suction and removal of the residuals in all the vertical and horizontal sections as well as the
bends from the stove to the flue.
It is advisable to also clean the flue every year, to ensure correct and safe evacuation of fumes.
5.8 Cleaning the exchangers with turbulator-shaker device
The fume ducts inside the heating chamber must be cleaned at
least once a day by operating the two knobs repeatedly with an
upward and downward movement.
Carry out this operation with the stove off and cold.
RH - LH control knobs of the turbulator-
shaker device in heating stove operation
low position.
6 MAINTENANCE
6.1 Introduction
Operations on the internal parts of the stove must be carried out by qualified personnel. Contact the nearest
authorised service centre.
Make sure the stove is unplugged and cold before carrying out any work on it.
6.2 Removing the TERMOPLUS 23
Key:
1 - Pellet hopper door
2 - Stell cover
3 - Right side panel
4 - Left side panel
5 - Extensions with knob for turbulators
6 - Exterior door front
52 TERMOPLUS 23