Operating - Titan PKE Notice D'instructions

7.

Operating

1. Place TITAN steel strap around the packing
unit from above.
2. Pull strap end thought until it is located in the
middle of the packing unit below the upper
strap and projects a hand span.
3. Hold both of the precisely overlapping straps
firmly using your left hand. Using your right
hand take hold of the lifting lever (c) and
compressed air motor (f) and press together.
Push both straps laterally along the housing
wall into the tool as far as possible. A bit of
the lower strap has to project out of the front
of the tool. Release the lever (c) and motor
(f).
PKE
H228 EU 21/11
28 / 59