User Menu; Setting First Nominal Pressure; Gas Flow Rates; Setting Smoke Evacuation Level - Surgiquest AirSeal i.F.S. Instructions D'utilisation

8.1

Setting First Nominal Pressure

In the user menu, tap the Starting Pressure key to access the setting.
Select the desired Starting Pressure for the currently selected insufflation mode.
Press the º or » keys to increase or decrease the nominal pressure.
Insufflation operating mode Factory setting
AirSeal Mode
Smoke Evacuation Mode
Standard Insufflation Mode
8.2

Gas Flow Rates

In the user menu, tap the Gas Flow Rates key to access the selection. You can se-
lect one of three gas flow rates for each insufflation mode.
Press the º or » keys to increase or decrease the gas flow.
Insufflation operating mode
AirSeal Mode (Initial Insufflation)
Smoke Evacuation Mode
Standard Insufflation Mode
8.3

Setting Smoke Evacuation Level

In the user menu, tap the Smoke Evacuation Level key to access the selection. For
AirSeal Mode a pre-setting can be chosen.
AirSeal Mode
8.4

Setting General Volume

In the user menu, tap the Audio/Display key to access the signal volume selec-
tion.
You can select one of four volume levels for the warning signals as well as the
info and alert signals, all in the form of acoustic signals. The selection/setting ap-
plies to all insufflation operating modes.
Press the º or » key to set the desired volume.
Warning signals Alert signals
I (Low) I (Low)
II (Medium) II (Medium)
III (High) III (High)
IIII (Very High) IIII (Very High)
8.5

Setting Brightness

In the user menu, tap the Audio/Display key to access the brightness selection.
Use the Brightness option to adjust the screen display to the ambient light con-
ditions within the operating room.
15 mmHg
15 mmHg
15 mmHg
Range
Gas flow between 1 and 40 l/min
Gas flow between 1 and 40 l/min
Gas flow between 1 and 40 l/min
LOW
HIGH
Info signals
I (Low)
II (Medium)
III (High)
IIII (Very High)
Range
5-15 mmHg
5-15 mmHg
5-15 mmHg

User Menu

EN
29