General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop 1344550 Notice D'utilisation

Flow temperature control module
1.

General information

The original operating instructions were drafted in
German.
The operating instructions in other languages were
translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the flow
temperature control module for surface heating
systems.
1.2

Extent of supply

Please check the delivery for any damages caused
during transit and for completeness.
Extent of supply:
1
2
3
4
5
Illustr. 1: Extent of supply
(1) Pump cable
(2) 2x Stainless steel corrugated pipe
(3) Temperature controller with contact sensor
(4) Accessories (2x double nipple, 2x set of flat
seals)
(5) Fixing plate
(6) Contact thermostat (+operating instructions)
with retaining spring
(7) Control module (+operating instructions
pump)
Operating instructions flow temperature
control module
134455080-V04.01.2020
7
6
1.3

Contact

Address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
Germany
Technical service
Phone: +49 (0) 29 62 82-234
1.4

Copyright and protective rights

These operating instructions are copyrighted. They
are exclusively designed for persons involved with
the product.
1.5

Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that this
product complies with the basic requirements and
the other relevant provisions of the EC Directives
concerned.
1.6

Used symbols

Important information and further explanations.
f Action required
• Enumeration
1. Fixed order. Steps 1 to X.
2.
Result of action
Z
2.

Safety-related information

2.1

Normative directives

The legal framework conditions valid at the
installation location must be observed.
The current standards, regulations and guidelines are
valid.
• VDI 2035
2.2

Correct use

Safety in operation is only guaranteed if the product
is used correctly.
The flow temperature control module serves the local
flow temperature control of surface heating systems.
Any use of the product outside the above
applications will be considered as non-compliant and
misuse.
Claims of any kind against the manufacturer and/
General information
15