Removal And Disposal - oventrop 1341088 Notice D'utilisation

Derivative temperature control set
Pay attention to the orientation of the valve (the
white marking of the handhweel must point to the
front). Screw the body in until the sealing ring is
completely covered by the body, then the connec-
tion is self-sealing.
Illust. 11: Installation of the valve Regudis W-HTO Duo
8. Bend the copper pipe into the installation position.
9. Push the end of the copper pipe into the body or
plug as far as it will go.
Illust. 12: Installation of the copper pipe Regudis
W-HTO Duo
10. Tighten the union nuts at the copper pipe.
11. Tighten the union nuts at the body.
12. Check all installation points for leaks.
134108880-V01.11.2020
1
6.

Removal and disposal

NOTICE
Risk of environmental pollution
Incorrect disposal (for instance with domestic
waste) may lead to environmental damage.
f Dispose of packaging material in an en-
vironmentally friendly manner.
f Dispose of the components properly.
If no return or disposal agreement has been made,
dispose of the product yourself.
f If possible, recycle the components.
f Dispose of components which cannot be recycled
according to the local regulations. Disposal with
domestic waste is not permitted.
Removal and disposal
17