Safety Instructions - Altrad Belle MINIMIX 130 Manuel De L'opérateur

GB
Before starting the mixer
DO NOT wear loose clothing or jewellery that may become entangled in the
workings of this machine.
Suitable clothing as follows should meet relevant EEC/local safety standards:
overalls, work boots, goggles, face mask, gloves and ear defenders etc.
DO NOT tip mixer onto the drum mouth when motor is running.
Ensure that any trailing cable is protected against damage and not liable to be
tripped over or trapped underneath the mixer.
We recommend the use of an Residual Current Device on 230v electrics.
Remove all packaging material before operating.
When operating the mixer
Keep unauthorised persons away from mixing drum.
Keep area around the mixer clear of obstructions which could cause persons to fall
onto moving parts.
Always ensure mixer is on level ground before mixing.
DO become familiar with the controls before operating this machine.
DO
DO replace any worn/damaged warning decals.
DO ensure the drum is rotating while emptying the mixer.
DO
unattended.
DO NOT use as a wheel barrow. Disconnect from power supply before moving.
BEWARE of the Danger Zones & Hot Zones.
Emergency Stop
Fire Fighting
brigade. If you are in any doubt about the safety condition of your machine, please contact
your Belle authorized Service Dealer.

Safety Instructions

4