Switching On And Off - ALFRA 18554 Mode D'emploi

Switching on and off

• Check connecting line and plug on damages first!
• Push button MAGNET ON, in order to initiate the magnet and the
magnetic adhesion is guaranteed.
• When working on walls and ceilings, safe machine with safety belt (f).
• Push the button MOTOR ON to start the Motor.
• To switch off machine proceed in reverse order: MOTOR OFF and then
MAGNET OFF!
Change of tools
How to work with annular cutters
• Push ejector pin (center pin) through head of annular cutter.
• Core drills with Weldon shank are tightened with clamping screws on
both clamping surfaces.
Core drills with RotaQuick shank are tightened with clamping screws
(DIN 914 M8 x 10) in a countersinking, tighten the second clamp screw.
15