Prior To Use - ALFRA 18554 Mode D'emploi

Standard scope of supply
Transport Case
Coolant Unit
Safety Belt
Allan Key 2,5 mm
Allan Key 4,0 mm
Allan Key 6,0 mm

Prior to use:

Appropriate Use
This device is destined to:
Cut material with magnetisable surface with core cutters, twist drills and to tap
threads in sheltered environment for commercial use industry and craft. The
device is suitable for drilling vertical, horizontal and overhead.
Safety Precautions
Danger of Injuries
During drilling operations on walls and ceilings, the Metal Core Drilling
Machine must be safeguarded with the included safety belt (f). The magnetic
adhesion is not maintained in case of a failure of circuit.
The cut core will be ejected automatically by the ejector pin (h). Danger of
accident! The ejector pin could possibly break in case of improper use.
Read Operation Manual!
Pay attention to Safety Precautions!
13