Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3 Product description
NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.
2.3 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Electrical power supply
• Coolant supply
• Compressed air supply
• Gas supply
Further measures can be found in the "Power source" operating instructions or in the
documentation of further peripheral devices.
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorisation.
• The device may only be used by qualified personnel (in Germany, see TRBS 1203).
3.1 Technical Data
Ambient temperature of welding
Transport and storage
Relative humidity
Tab. 1
Temperature
Type of voltage
DC polarity of the electrodes
Type of use
Tab. 2
General torch data (EN 60 974-7)
EN - 4
DC
Usually positive
Hand-held
MAG Welding torches
- 10 °C to + 40°C
- 25 °C to + 55°C
up to 90 % at 20 °C
BAL.0147 • 2018-11-09
Publicité
Table des Matières
