Abicor Binzel MAG RB/RP Mode D'emploi page 14

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com.
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical Data
3.2 Signs and symbols used
4 Putting into operation
4.1 Equipping the torch
4.2 Mounting the wire guide
4.2.1 Liner
4.2.2 PA liner
4.3 Attaching the cable assembly on the
machine side
4.4 Connecting the coolant
4.5 Setting the shielding gas volume
4.6 Feeding in the wire
EN - 2
EN-3 5 Control elements torch
EN-3 handle
5.1 Two-cycle trigger function
EN-3
EN-3 6 Operation
EN-3
EN-4 7 Putting out of operation
EN-4 8 Maintenance and cleaning EN-11
EN-4 8.1 Cleaning the wire guide
EN-5 8.2 Changing the torch neck
8.3 Cleaning the torch neck
EN-6
EN-6 9 Disposal
EN-7
EN-8
EN-8
EN-8
EN-8
EN-9
EN-9
MAG Welding torches
EN-10
EN-10
EN-10
EN-10
EN-12
EN-13
EN-13
EN-13
BAL.0147 • 2018-11-09