Designated Use; Classification Of The Warnings - Abicor Binzel MAG RB/RP Mode D'emploi

MAG Welding torches
1 Identification
The MAG manual welding torches are used for safe welding of low- and high-alloy materials.
They consist of a torch neck equipped with equipment parts and wear parts, handle or handle
tube and cable assembly with central connector. They correspond to the directive
EN 60 974-7 and are not considered to be devices having their own functions. Arc welding can
only be carried out in connection with a welding power supply.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
2 Safety
The attached safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose described in
these instructions in the manner described. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not allowed.

2.2 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and are
shown prior to potentially dangerous work steps. Arranged in descending order of importance,
they have the following meaning:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely
critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor
injuries.
BAL.0147 • 2018-11-09
1 Identification
EN - 3