Pando PHT 9245 Guide Rapide D'utilisation page 43

3172941-000 EPIFA 25/02/16 09:03 Página 43
Pre-heating is not needed for the other
recipes.
Follow these instructions when cooking with
these recipes:
• First select the recipe, and the oven will
begin pre-heating.
• IMPORTANT: Do not put the food into the
oven until the signal is given.
Child Safety Function
This function, which can be selected at any
time, stops small children operating the oven.
To activate this function, touch both the
and sensors at the same time until you
hear a beep. You will see the symbol
light up on the temperature display. The oven
is locked.
To de-activate this function, touch both the
and sensors at the same time until you
hear a beep, with the symbol
With this function, any grease or dirt that is
stuck to the walls of the oven can easily be
removed through the combined action of
steam and the excellent properties of the new
enamel.
Other oven settings
going out.
STEAM CLEANING SYSTEM by Pando (S.C.S.)
• When the temperature set for the recipe is
reached, the oven will emit a signal.
• You can now put the food into the oven.
• The signal will continue to sound until you
put the food in.
• Finally, it will cook the food automatically
according to the recipe chosen.
Oven Light
The inside light will go on:
• When the oven door is open. If the door is not
closed after a certain amount of time, the
light will turn off to reduce power consump-
tion.
• When any cooking function is set or recipe
selected. The light will turn off after a cer-
tain time.
If you want to turn the light on during cooking,
just touch the sensor. Touching it for a cer-
tain length of time will cause it to beep and
the light will stay on all the time it is cooking.
To turn the light off, just touch the
again.
Thanks to the new technology, the oven does
not need to be cleaned with a grease removal
product. When the water and dirt are removed,
the walls of the oven are clean and grease-
free.
symbol
43