Using The Oven - Pando PHT 9245 Guide Rapide D'utilisation

3172941-000 EPIFA 25/02/16 09:03 Página 34
Caution
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure the
glass surface of the control panel is clean and
free of obstacles when plugging in the oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this
causes the sensors to adjust automatically so
that they will react once more to fingertip con-
trol.
Caution
In the event of a power failure, your electronic
clock settings will be erased and 12:00 will
flash on the clock display. Reset the clock and
programme again.
Electronic Clock Settings
• Symbol Steam Cleaning System by
Pando (S.C.S.): Lights up during the clean-
ing function.
• Symbol : lights up when the clock
timer is selected.
34

Using the Oven

• Symbol
oven is programmed.
• Symbol
transmitting heat to the food.
• Sensors
time.
• Sensors
programme the electronic clock functions.
• Sensor
Offers you direct access to recipes.
• Sensor
Setting the Time
• When you turn on the oven, you will see the
clock flashing 12:00.
• Set the clock by touching the
sor. You will hear 2 beeps confirming that
the time has been set.
• To change the time, press the
sensors at the same time. The current time
will then flash on the screen. Change the
time by pressing the
beeps will then confirm that the new time
has been set.
NOTE
The clock light has a night mode so the dis-
play light will dim between 00:00 and 6:00
hours.
: lights up to indicate that the
: indicates that the oven is
/ : enable you to select a
, and : enable you to
Pando Chef: Cooking assistant.
: Switching the oven On / Off.
or
or sensors. Two
sen-
and