Preparing the Walkie−Talkies for Use
Charging the battery pack
Before using the walkie−talkies for the first time, place them in the
charging station for at least 14 hours. When the walkie−talkies are
inserted correctly in the charging station, the red LEDs light up. The
red LEDs also light up when the battery packs are fully charged.
The battery capacity is indicated in the display by the
As soon as the indicator flashes in the display and acoustic warning
signals are issued, the battery pack needs to be recharged.
Attaching the belt clips
Insert the belt clip in the opening from the top until it audibly snaps
into place. To remove the belt clip, press on it and pull it from the
opening.
50
Do not charge the walkie−talkies with charging units from
other manufacturers.
Full
Half empty
Low
Empty
icon.