Battery Operation - Sangean TRAVELLER 760 Mode D'emploi

Battery operation

1.
Open the battery cover on the rear of the unit by pushing the latch downward.
NOTE
Before you insert the batteries, check the NiMH / Alkaline switch position. If you
use non-rechargeable batteries, make sure the NiMH / Alkaline switch which
located inside the battery compartment is switched to Alkaline position. If you use
rechargeable batteries, make sure to switch NiMH / Alkaline switch to NiMH position.
2.
Insert 4xLR6 (AA size) batteries into the space in the compartment. Ensure the
batteries are inserted in accordance with the diagram shown. Close the battery
compartment door.
3.
The low battery indicator showing red, reduced power, distortion and a 'stuttering'
sound are all signs that the batteries may need replacing.
4.
If the radio is not to be used for any extended period of time it is recommended that
the batteries are removed from the radio.
007