Software Version Display - Sangean TRAVELLER 760 Mode D'emploi

Software version display

The software version display is provided for reference and customer support purposes
and cannot be changed.
1.
With your radio switched on, press and hold Info / Menu button to access the menu
for the current mode.
2.
Press the Tuning Up / Down button to select "System settings". Press the Select
button to enter the system settings menu.
3.
Press the Tuning Up / Down button to select "SW version". Press the Select button
to display the software version.
4.
Press the Info / Menu button to exit the software version display.
USB socket for software upgrade
From time to time, new software features for your radio may be developed. Your radio
has therefore been designed to allow its internal software to be updated using your USB
upgrade port.
You should not attempt to update your radio unless it is recommended to you by
Sangean Customer Services. Updating the software may remove all radio station
presets and settings from your radio.
Software updates for your radio may be available in the future. As software updates
become available software and information on how to update your radio can be found at:
http://sg.sangean.com.tw/first/first.asp
http://www.sangean.eu
www.sangean.com.au.
For more information, please contact our Head Office by sending an email to
info@sangean.com
1.
Using the micro USB cable (not supplied) to connect the USB socket on the left
hand side of the radio and your PC USB port.
2.
Go to the website above to download the latest software. Follow the on-screen
instructions on your PC provided with the upgrade software to complete the software
upgrade.
024