Setting The Clock Format - Sangean TRAVELLER 760 Mode D'emploi

Automatically updating the clock
You may specify that the radio sets its clock from DAB or FM radio broadcasts. After a
power failure the radio will then set its clock the next time that you turn on the radio in
DAB or FM mode.
Alternatively you may specify that the time is not automatically updated. In this case the
clock must always be set manually after a power interruption.
1.
With your radio switched on, press and hold Info / Menu button to access the menu
for the current mode.
2.
Press the Tuning Up / Down button to select "System settings". Press the Select
button to enter the system settings menu. (Using the Tuning Up / Down and Select
buttons to select "Back" will go back to a higher level menu.)
3.
Press the Tuning Up / Down button to select "Time / Date". Press the Select button
to enter the setting.
4.
Press the Tuning Up / Down button to select "Auto update". Press the Select button
to enter the auto-update menu.
5.
Press the Tuning Up / Down button to choose an update option from "Update from
DAB", "Update from FM", or "No update" as required. Press the Select button to
confirm your choice. The radio will then exit to the previous menu display.

Setting the clock format

1.
With your radio switched on, press and hold Info / Menu button to access the menu
for the current mode.
2.
Press the Tuning Up / Down button to select "System settings". Press the Select
button to enter the system settings menu.
3.
Press the Tuning Up / Down button to select "Time / Date". Press the Select button
to enter the setting.
4.
Press the Tuning Up / Down button to select "Set format". Press the Select button to
enter the clock format setting. The current clock display format is marked with an asterisk.
5.
Press the Tuning Up / Down button to select either 12 or 24 hour format. Press the
Select button to confirm your choice of clock format. If the 12 hour clock format is
chosen, the radio will display a 12 hour clock with an AM or PM indicator.
020