Operating Your Radio - Dab - Sangean TRAVELLER 760 Mode D'emploi

Lock switch
The Lock switch is used to prevent unintentional operation of your radio.
1.
Set the Lock switch located on the back of your radio to the 'Lock' position
The power and all other buttons will be disabled, this will prevent accidental operation
when your radio is packed in a suitcase or travel bag.
2.
To release the lock, slide the Lock switch down to the 'Unlock' position
Operating your radio – DAB
1.
Carefully extend the telescopic aerial.
2.
Press the On / Off button to switch on your radio. The display will show "Welcome to
Digital Radio" for a few seconds.
3.
If this is the first time the radio is used, a quick scan of the Band III DAB channels will
be carried out. If the radio has been used before the last used station will be selected.
4.
During the scanning process, as new stations are detected the station counter will
increase and the stations will be added to the list which is stored in the radio. The
bar graph indicates the progress of the scan.
5.
When the scanning is completed the first station (in numeric-alpha order 0...9...A....Z)
will be selected.
6.
If the station list is still empty after the scan, your radio will show "No DAB Station"
for a moment.
7.
If no signals are found it may be necessary to relocate your radio to a position giving
better reception.
010
.
.