Prune Stations - Dab - Sangean TRAVELLER 760 Mode D'emploi

2.
Press the Tuning Up / Down button to select the "Station order".
3.
Press the Select button to enter the station order adjustment mode.
4.
Press the Tuning Up / Down button to choose 'Alphanumeric', 'Multiplex' and
'Active'.
'Alphanumeric' - sorts the station list alpha-numerically 0...9 A...Z.
'Multiplex' - organizes the station list by DAB multiplex.
'Active' - shows only those stations for which a signal can be found.
The current setting is indicated by an asterisk.
5.
Press the Select button to confirm the required station order.
Prune stations – DAB
If you move to a different part of the country, some of the stations which were listed
may no longer be available. Also, from time to time, some DAB services may stop
broadcasting, or may change location or frequency. Stations which cannot be found,
or which have not been received for a very long time are shown in the station list with
a question mark. The Prune stations function will delete the marked DAB stations from
your station list.
1.
When in DAB mode press and hold the Info / Menu button to enter the DAB menu.
2.
Press the Tuning Up / Down button to select the "Prune Station".
3.
Press the Select button to enter adjustment mode.
4.
Press the Tuning Up / Down button to select to "Yes" or "No". To activate the Prune
function select "Yes", then press the Select button to confirm the setting. If you do
not wish to prune stations, select "No" and then press the Select button to confirm
the setting.
NOTE
If you have moved your radio to a different part of the country you should also carry
out a search for new stations (please see the section 'Finding new stations').
015