Station Order Setup - Dab - Sangean TRAVELLER 760 Mode D'emploi

Dynamic Range Control
settings – DAB
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear
when your radio is used in a noisy environment by reducing the dynamic range of the
audio signal.
1.
When in DAB mode press and hold the Info / Menu button to enter the DAB menu.
2.
Press the Tuning Up / Down button to select the "DRC".
3.
Press the Select button to enter the DRC adjustment mode. The current DRC
setting will be indicated with an asterisk.
4.
Press the Tuning Up / Down button to highlight the required DRC setting (the default
is Off).
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1 / 2 that sent by broadcaster.
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
5.
Press the Select button to confirm the setting.
NOTE
Not all DAB broadcasts use the DRC function. If the broadcast does not provide
DRC information, then the DRC setting in the radio will have no effect.
Station order setup – DAB
Your radio has 3 station order settings from which you can choose. The station order
settings are, alphanumeric, multiplex and active.
NOTE
The default station order on your radio is alphanumeric.
1.
When in DAB mode press and hold the Info / Menu button to enter the DAB menu.
014