Using The Wall Mount; Mounting The Wall Mount; Removing The Wall Mount; Using The Benchtop Support - StarLab ErgoOne Fast Mode D'emploi

5.7 Using the wall mount

For storage, the pipette controller can be put in a wall mount.
Fig. 9: ErgoOne
®
5.7.1

Mounting the wall mount

1. Clean the mounting location on the wall and allow it to dry.
2. Remove the protective foil.
3. Press the wall mount firmly against the wall. Allow the adhesive tape to dry for 24 hours.
5.7.2

Removing the wall mount

1. Rotate the wall mount to loosen the adhesive tape.
2. Remove the adhesive tape.

5. 8 Using the benchtop support

The optional benchtop support can also be used for storage.
Fig. 10: Attaching the benchtop support
›
Insert the benchtop support in the groove.
›
To remove the benchtop support, press the sides of the benchtop support together.
24
· ErgoOne FAST · User Manual
FAST with wall mount
+
=