Materials; Features - StarLab ErgoOne Fast Mode D'emploi

2.4 Materials

NOTICE! Aggressive substances may damage the ErgoOne
›
Check the chemical resistance before using organic solvents or aggressive chemicals.
›
Observe the cleaning instructions.
The pipette controller assemblies are composed of the following materials:
Component
Housing, aspirating cone, aspiration button,
dispensing button, membrane filter housing,
wall holder, benchtop support
Filter adapter
Pipette adapter
Filter membrane
Seal for filter adapter
Tubes and valves
Battery status display

2.5 Features

The ErgoOne FAST is a battery-driven pipette controller. You can use glass or plastic pipettes in
®
a volume range of 0.1 mL to 100 mL.
A pump generates underpressure or overpressure to aspirate or dispense the liquid. The liquid
can also be dispensed solely via the atmospheric pressure. The aspirating and dispensing speed is
controlled by how far the control buttons are pressed in.
FAST and accessories.
®
Material
Polypropylene (PP)
Polytetrafluoroethylene (PTFE)
Silicone
Polytetrafluorethylen (PTFE)
Hydrated acrylonitrile butadiene rubber (HNBR)
Polymer fluorine rubber (FKM), polybutylene
terephthalate (PBT), polyphenylene sulfide
(PPS), silicone
Cyclic olefin copolymer (COC)
ErgoOne FAST · User Manual ·
9