Regeneration Of The Purifier - LAVAZZA Cap100US Manuel D'installation Et D'utilisation

13.1.9 Regeneration of the purifier

F. 17
IMPORTANT
Regenerate the purifier at the scheduled deadlines
indicated below:
HARDNESS ° F
From 00 to 20
From 21 to 30
From 31 to 40
From 41 to 50
- Place an empty container with a capacity of 2 litres under the
pipe E
- Move the levers C and D from left to right as in fig. 17.02, remove
the cover by releasing the knob G, add 1.5 Kg of sodium chloride
(cooking salt), in the purifier (type 8 litres) and 2 kg in the purifier
(type 12 litres).
- Replace the cover and reposition the lever C from right to left
as in fig. 17.03 and let the salty water drain from the tap F until there
is fresh water.
- Reposition the lever D from right to left as in fig. 17.04.
IMPORTANT
The regeneration operations are correct only if the purifier
is the one shown in the figures. If it does not correspond,
proceed as indicated in the instructions attached to the
purifier.
• 26 •
PURIFIER TYPE 8 LITRES
regeneration after 1100 l.
regeneration after 850 l.
regeneration after 650 l.
regeneration after 450 l.
A WATER INLET
B WATER OUTLET
C INLET TAP LEVER
D OUTLET TAP LEVER
E GROUP VACUUM UNIT
F REGENERATION PIPE
G COVER KNOB
PURIFIER TYPE 12 LITRES
regeneration after 1600 l.
regeneration after 1250 l.
regeneration after 950 l.
regeneration after 650 l.