p1. Products
p1.1.
Global
p1.1.1. AutoProgram
p1.1.2. Prebrewing
p1.1.3. Milk Drainage
p1.1.4. Milk Cleaning
p1.2. Details
p1.2.1. Left products
p1.2.2. Right products
p1.2.3. HotWater
p2. System
p2.1. Temperature
p2.1.1. Delta Temperature
p2.1.2. Coffee Heater
p2.2. Security
p2.2.1. Operator Password
p2.2.2. Technical Password
p2.3. Options
p2.3.1. Cup Heater
p2.3.2. Antifreezing
p2.3.3. Unit Visible
p2.3.4. Buzzer
p2.4. Date/Time
p2.4.1. Date
p2.4.2. Date Format
p2.4.3. Time
p2.4.4. Time format
p3. Factory Default
s1. Maintenance
s1.1. Water filter
s1.1.1. New filter date
s1.1.2. Liters to Renew
s1.1.3. Filter limit
s1.1.4. Reset filter
s1.1.5. Filter enable
s1.2. Drillers
s1.2.1. Warning enabled
s1.2.2. Left driller state
s1.2.3. Right driller state
s1.3. Test mode
s1.3.1. Master test
s1.3.2. Left Coffee test
s1.3.3. Right Coffee test
s1.3.4.
Water/Steam
test
s2. System Info
s2.1.
Identification
s2.1.1. Software Version
s2.1.2. Machine Code
s 2 . 2 .
Error Log
s2.2.1.
Errors
s2.2.2. Reset log
s2.3. Audit
s2.3.1. Counters from init
s2.3.2. Counters from reset
s2.3.3. Reset Audit
s3. Install/Uninstall
s3.1. Install
s3.1.1. Language
s3.1.2. Machine Code
s3.1.3. Display Contrast
s3.2. Uninstall
s3.2.1. Empty Boiler
•
20
•
S1.3.3.2.
Check motor
S1.3.3.3.
Check flow
S1.3.3.4.
Check temp
S1.3.4.
Water/Steam test
S1.3.4.1.
Low level test
S1.3.4.1.1.
Boiler test
S1.3.4.1.2.
Water sys. test
S1.3.4.1.3.
Steam sys. test
S1.3.4.1.4.
Board Temperature
S1.3.4.2.
Check water flow
S2.1.
Identification
S2.1.1.
Software Version
S2.1.1.1.
Master unit
S2.1.1.2.
Right coffee
S2.1.1.3.
Left coffee
S2.1.1.4.
Water / Steam
S2.1.2.
Machine Code
S2.2.
Error Log
S2.2.1.
Errors
S2.2.2.
Reset log
S1.3.3.2. Check motor (technician only)
.
S1.3.3.3. Check flow (technician only)
S1.3.3.4. Check temp (technician only)
S1.3.4. Water/Steam test (technician only)
S1.3.4.1. Low level test (technician only)
S1.3.4.1.1. Boiler test (technician only)
S1.3.4.1.2. Water sys. test (technician only)
S1.3.4.1.3. Steam sys. test (technician only)
S1.3.4.1.4. Board temperature (technician only)
S1.3.4.3. Check water flow (technician only)
S2.1
IDENTIFICATION
S2.1.1. Software version
Enables display of the software versions of the following cards:
- Master unit;
- Right coffee;
- Left coffee;
- Water&Steam
S2.1.2. Machine code
Enables to display the machine code
S2.2
ERROR LOG
This function allows the last 50 errors occurred to the machine to
be displayed:
S2.2.1. Errors
Displays each individual error and provides certain information
about it (since last reset):
- part of the machine affected by the error;
- error number;
- error date and time.
S2.2.2. Reset log (technician only)