AVG AVI-366IS – IOWA Instructions D'installation Et Guide De L'usager page 24

INSTALLING THE UNIT (continued)
Step 8:
Direct the air outlet of the duct outwards. Make sure not to bend
the exhaust pipe more than 120 °.
Figure 8
Step 9:
Pull the inner duct cover toward the ceiling, aiming the upper
support frame. Secure with 4 M4x10 screws as shown in Fig. 9.
Figure 9
Step 10:
Install the grease filters. Match the mounting pin with the
mounting hole and gently press the filter in the direction of
arrow A.
Figure 10
25