One-Touch Play; Using "Bravia" Sync Features; Power Save; Scene Select - Sony HT-CT660 Mode D'emploi

One-Touch Play

When you play the equipment
connected to the system with an HDMI
cable, the connected TV is turned on
automatically and the input signal of
the system is switched to the
appropriate HDMI input.
Notes

The above features may not operate
with certain equipment.
 Depending on the settings of the
connected equipment, the Control for
HDMI function may not work correctly.
Refer to the operating instructions of
the equipment.
20
US
Using "BRAVIA" Sync
features
The original Sony functions listed
below can also be used with products
that are compatible with "BRAVIA"
Sync.

Power save

If a "BRAVIA" Sync-compatible TV is
connected to the system, the power
consumption is reduced in standby
mode by stopping HDMI signal
transmission when TV is turned off
(P. THRU, page 28).

Scene Select

If a "Scene Select"-compatible TV is
connected to the system, the sound
field changes automatically,
optimized according to the program
currently playing on the connected TV.
Notes on HDMI
connections
 Use a High Speed HDMI cable. If you
use a Standard HDMI cable, 1080p,
Deep Color, or 3D/4K images may
not be displayed properly.
 We recommend that you use an
HDMI authorized cable or a Sony
HDMI cable.
 We do not recommend using an
HDMI-DVI conversion cable.
 Check the setup of the connected
equipment if an image is poor or the
sound does not come out of the
equipment connected via the HDMI
cable.
Audio signals (sampling frequency,

bit length, etc.) transmitted from an