Linking The System (Link) - Sony HT-CT660 Mode D'emploi

Linking the system
(LINK)
You can link the Sound Bar and the
subwoofer again to enable wireless
transmission between them.
1
Press AMP MENU.
2
Select "WS" in with   (select),
then press
3
Select "LINK," then press
 (proceed).
4
"START" appears, then press
"SEARCH" appears, and the Sound
Bar searches for equipment that
can be used with Link. Proceed to
the next step within 1 minute.
To quit the Link function during a
search for equipment, press .
5
Press LINK on the rear of the
subwoofer with the point of a
pen, etc.
The  indicator on the
subwoofer lights up in green. "OK"
appears on the front panel display.
If "FAILED" appears, check to
ensure the subwoofer is turned
on, and perform the process again
from step 1.
6
Press AMP MENU.
The AMP menu turns off.
30
US
or  (proceed).
or
.