Remote Control - Sony HT-CT660 Mode D'emploi

Remote control

This section describes how to operate
the subwoofer, Sound Bar, and
connected equipment using the
remote control supplied. If you cannot
operate the connected equipment,
use the remote control of the
equipment.
Note

Point the remote control towards the
remote control sensor ( ) of the Sound
Bar.
* The  and VOL + buttons have a
tactile dot. Use it as a guide during
operation.
12
US
To control the system
 INPUT (page 19)
Press to select the equipment you
want to use.
  (on/standby)
 SOUND FIELD +/ (page 26)
 SOUND FIELD (page 26)
 DISPLAY
Each time you press the button,
the display turns on or off.
When the system is operated, the
display is lit for several seconds.
 MUTING
 VOL (volume) +*/
 AMP MENU (page 27)
 PAIRING (page 23)
 RETURN button
Returns to the previous screen of
any displayed menu.
  (return)/  (select)/
 (proceed) or
Press , ,  or  to select the
menu items. Then press
enter the selection.
 SPEAKER TV  AUDIO
Press to switch the output sound
(TV or this system) from the
speakers.
To control a TV
 TV VOL (volume) +/
Adjusts the volume.
 TV CH (channel) +/
Selects the next (+) or previous ()
channel.
 TV INPUT
Selects input.
 TV  (on/standby)
Turns on or off the TV that the
remote control is assigned to
operate.
(enter)
to