Troubleshooting; Technical Data; Disposal - Cleanmaxx GW906-S60 Mode D'emploi

Troubleshooting

If the device stops working properly, fi rst check whether you are able to correct the
problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
The performance is
weak.
Dust escapes from
the device during
cleaning.
During vacuum
cleaning, an unple-
asant smell is detec-
ted.

Technical Data

Model:
Article number:
Voltage supply:
Power:
Protection class:

Disposal

The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. Dispose of it at a
recycling centre for used electrical and electronic devices.
You can obtain more information from your local authorities.
21
Possible cause/solution/tips
• Is the plug not inserted in the mains socket correctly?
Insert the plug correctly.
• Is the plug socket defective? Try another plug socket.
• Check the fuse of your mains connection.
• Is the dust container too full? Empty the container.
• Are the dust fi lters heavily clogged? Clean them.
• Are the nozzles blocked? Clean the nozzles.
• Is the dust container full? Empty the dust container.
• Are the dust fi lters not inserted correctly? Make sure that
the plastic dust fi lter is fi tted correctly in the dust container
and the fabric fi lter is placed correctly on the plastic dust
fi lter.
• Is the device being used for the fi rst time? A smell often
develops when new devices are fi rst used. The smell
should disappear after you have used the device several
times.
GW906-S60
Z 09294
230 V ~ 50 Hz
max. 600 W
II
IP20
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge. The
cost varies depending on the
service provider.)
All rights reserved.
EN