Deep Frying; Preparation - SilverCrest SEF 2300 A1 Mode D'emploi

Deep frying

GB
IE

Preparation

8
We recommend cooking oil or liquid cooking fat for use in this deep fat fryer.
You can also use solid cooking fats. Read the chapter "Solid Cooking Fats" for
more information.
1) Place the appliance on a horizontal, level, stable and heat-resistant surface.
NOTE
► If you wish to place the deep fat fryer below the cooker extraction hood,
ensure that the cooker is switched off .
2) Pull the mains cable from the power cable retainer q on the rear of the
control and heating element 0.
3) Press the lid release button 4 and lift the lid off at the same time.
4) Remove the frying basket 6 and attach the handle r to the frying basket 6:
–
Press the rods of the handle r together a little so that the holding pins
can be inserted into the eyelets on the frying basket 6:
SEF 2300 A1