Deep Frying; Preparation - SilverCrest SKF 2800 B2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

You should therefore avoid frying foodstuffs with a high starch content, for
example chips, at temperatures above 170°C. The foodstuffs should only be
fried to golden-yellow, instead of dark or brown. This is the only way to achieve
low-acrylamide cooking.

Deep frying

We recommend cooking oil or liquid cooking fat for use in this deep fat fryer.
You can also use solid cooking fats. Read the chapter "Solid Cooking Fats" for
more information.

Preparation

1) Place the appliance on a horizontal, level, stable and heat-resistant surface.
NOTE
If you wish to place the deep fat fryer below the cooker extraction hood,
ensure that the cooker is switched off.
2) Unwind all of the power cable from the cable spool
3) Open the appliance lid by pressing the lid release button
lid flips open.
4) Pull the handle upwards until it audibly engages. Remove the frying basket
TIPS
Only use oils or fats which are specifically labelled as non-foaming and
are suitable for deep frying. This information is to be found on the packag-
ing or the label.
Never mix different types of oil or fat! The deep fat fryer could froth over.
5) Fill the dry and empty deep fat fryer (with inserted control/heating element
with cooking oil, liquid or molten fat (about 3 litres of oil or about 2.5 kg of
solid fat).
NOTE
When charging the stainless steel container
to above the MAX marking or to below the MIN marking.
6) Insert the power plug into the mains power socket.
RISK OF ELECTRIC SHOCK
The power cable must not come into contact with the hot parts of the deep
fat fryer. Danger of electric shock!
SKF 2800 B2
.
. The appliance
with oil or fat, NEVER fill it
 53
GB
.
)

Publicité

Table des Matières
loading

Table des Matières