Alarm And Functions Menu - MZ electronic EV-030 Instructions D'utilisation

Alarm and functions menu

Use the
Up Alarm
It is possible to enable the function and
establish the height at which the
anchor-winch stops; after which it is
only possible to give pulsed
commands.
Settable values: 1.0 - 1.5 - 2.0...5.0
(metres or feet).
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with
the pressing (for at least 3 seconds) of
the keys and
Settable value: 5 - 10 - 15...40 (metres
or feet).
Load Default
This function allows the User to revert
to the original factory default settings,
thus erasing all settings memorised.
This command must only be used in
the event of programming errors.
Exit
To return to the settings menu.
EV-030
Alarms & Functi
U p A l a r m
A u t o D o w n
L o a d D e f a u l t
E x i t
(DOWN) or
.
3 . 0
(UP) key to move around the parameters.
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
= Yes
Confirm with
Confirm with
37
English
O f f
N o
= No
Rev. 07 – 2008