MZ electronic EV-030 Instructions D'utilisation page 33

English
Starting up
The chain counter features a graphic display and three keys: (ON),
(UP) and (DOWN). There is also a buzzer that indicates the pressing of
the keys or attracts the user's attention in particular conditions (alarm
triggering).
The ON key switches on the display and enables the other two keys. It must be
used to access the parameter setting menus. For selecting the parameters to
be modified and to confirm the values set. The display backlight will switch off
30 seconds after the last command given (adjustable default time – see
"BkLight Time").
The UP key commands the hoisting of the
anchor and the DOWN key casts it. When the
key is released, the action is stopped. During
parameter setting, the two keys allow the User
to move around the menu and vary parameter
values.
When switched on, the instrument will make a
beep and the following page will appear for a few seconds:
EV-030 33 Rev. 07 – 2008