Setting The Timer To Turn More Than One Cooking Zone Off - ROSIERES RI633DTT Mode D'emploi

3. Set the time by touching the "-" or "+" control.
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. To cancel the timer, touch the "-" or "+" of the selected zone, and then touch
the '-' or '+' of the "Timer", the timer is cancelled, and the "00" will show in the
minute display, and then "--".
5. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer indicator
flash for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be automatically switch off and
show "H".
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone
off
1. If use this function to more than one heating zone, the timer indicator will show
the shortest time.
(e.g. zone 1# setting time of 2 minutes, zone 2# setting time of 5 minutes,
the timer indicator shows "2".)
NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating
EN-20