Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
zone slide control one time. The timer will indicate its set time.
2. When cooking timer expires, the corresponding heating
zone will be automatically switch off and show "H".
NOTE: If you want to change the time after the timer is set, you have to start
from step 1
Care and Cleaning
What?
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)
(set to 5 minutes)
(set to 2 minutes)
How?
1. Switch the power to the
cooktop off.
2. Apply a cooktop cleaner
while the glass is still warm
(but not hot!)
3. Rinse and wipe dry with a
clean cloth or paper towel.
4. Switch the power to the
cooktop back on.
Important!
• When the power to the cooktop is
switched off, there will be no 'hot
surface' indication but the cooking
zone may still be hot! Take extreme
care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check if your cleaner or scourer is
suitable.
• Never leave cleaning residue on the
cooktop: the glass may become
stained.
EN-21
Publicité
Table des Matières
