Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not selecting any cooking
zone.
2. Touch "-' or "+" of the timer control, the minder indicator will
start flashing and "99" or "01" will show in the timer display.
3. Set the time by touching the "-" or "+" control,
Hint: Touch the "-" or "+" control once to decrease or increase by 1 minute.
Hold the "-" or "+" control of the timer to decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. Cancel the time by touching the "-" of timer and scrolling down to "0".
5. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer indicator
will flash for 5 seconds.
6. Buzzer will bips for 30 seconds and the timer indicator
shows "- - " when the setting time finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1.
Touch the "-" or "+" to activate the zone that you want
to set the timer for. (e.g. zone 1#)
2. Touch "-' or "+" of the timer control, the minder indicator
will start flashing and "30" will show in the timer display.
EN-19