Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Technical Specification
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric
Power
Product Size
L×W×H(mm)
Building-in
Dimensions A×B
(mm)
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate. As shown below:
RI633DTT
3 Zones
220-240V~, 50-60Hz
2.5kw:2250-2750W or
3.0 kw:2700-3300W or
4.5kw:4050-4950W or
5.5kw:4950-6050W or
6.9kw:5500-6900W
590X520X55
560X490
EN-25
RIS642DTT
4 Zones
220-240V~, 50-60Hz
2.5kw:2250-2750W or
3.0 kw:2700-3300W or
4.5kw:4050-4950W or
6.5kw:5850-7150W or
7.4kw:6600-7400W
590X520X55
560X490
Publicité
Table des Matières
