Introduction; Main Features; Technical Specifications - Aprimatic Traffic Park 24 Manuel D'installation Et D'utilisation

Masquer les pouces

Les langues disponibles

1. INTRODUCTION

The control unit denominated

encoder input for learning the stroke and recognising the obstacle.

Thanks to the considerable amount of logic available even very particular operating conditions on sytems can be met.

2. MAIN FEATURES

- Microprocessor logic

- Green LEDS displaying the status of the N.O. control inputs and red LEDS for the status of the N.C. safety ones

- Pull out terminal blocks

- Output for flashing warning lamp and traffic light

AP.PED

CHIUDI

3. TECHNICAL SPECIFICATIONS

- Power:..........................................................................................................230Vac ±10% 50/60 Hz 100W

- SCA output:.................................................................................................................................24Vac 3 W

- Flashing lamp output:.........................................................................................................24Vac 25Wmax

- Power supply output for accessories:.................................................................20 ÷ 26 Vac 12W max

- Installation and operation manual

is designed to manage the "

APRI

START

- 11 -

" automatic barrier and is equipped with

M1:

Power terminal board

M2:

Controls and safety devices terminal board

M3:

Motor terminal, transformer, +acc

J1:

Selection Jumper - 1st radio channel

J2:

Selection Jumper - 2nd radio channel

SW3: 8-way Dip Switch

F2:

T1A 5x20

AP.PD: Semi-automatic opening cycle

START: Start and programming

PM1:

Pause time

PM2:

Speed

PM3:

Pre-manoeuvre warning lamp flash time

Table des Matières