Preparing The Connection To The Flue - Dovre 640WD Installation Et Mode D'emploi

10. Remove the fire-resistant inner plates; see the fol-
lowing figure:
a. Remove the fire basket (6).
b. Lift the left baffle plate (1), slide the right baffle
plate (2) to the left and remove. Remove the
other baffle plate (1).
c. Pull the left rear plate (3) forwards from the
centre and remove. Pull the right rear plate (4)
forwards from the centre and remove.
d. Remove the left inner plate (5) Remove the
right inner plate (6,8)
e. Remove the inner plate of the side filling door
(7)
f. Remove the ash removal port (9)
g. Remove the stove base (11,12)
h. Remove the ash pan (13)
Vermiculite inner plates are light and tend
to be ochrous in colour on delivery. They
insulate the combustion chamber to boost
combustion.
11.
Removable internal parts
1 left baffle plate
2 right baffle plate
3 Inner plate back left
4 Inner plate back right
5 side inner plate left
6 upper side inner plate right
7 inner plate side filling door
8 bottom side inner plate right
Subject to change because of technical improvements
9 ash removal port
10 fire basket
11 left-hand bottom of the fire compartment
12 right-hand bottom of the fire compartment
13 ash pan
Preparing the connection to
the flue
When connecting the appliance to the flue you have
the choice of connecting via either the top or the rear.
See the paragraphs "Connecting to the rear" and "Con-
necting to the top".
Connecting to the rear
1. Remove the connection collar (2) from the top of
the appliance.
2. Remove the cover (A) from the rear of the appli-
ance.
3. Fit the connection collar (2) to the back wall using
the mounting materials supplied (3,4,5).
4. Fit the cover (A) to the top plate using mounting
materials (B,C,D,E).
11