Product Description; Installation; General Preparation - Dovre BOLD 300 Installation Et Mode D'emploi

The connecting tube also radiates heat. Ensure
that there is sufficient distance or a shield
between the connecting tube and combustible
material.
The rule of thumb for a single-walled tube is a
distance of 3x the diameter. If a lining shell is
fitted around the tube, a distance of 1x the dia-
meter is permissible.
Carpets and rugs must be at least 80 cm away
from the fire.
Use a fireproof floor plate to protect a flam-
mable floor from any ash which may fall in front
of the stove. The floor plate must comply with
national standards.
For the dimensions of the fireproof protective
plate: see the appendix "Distance from com-
bustible material".
For further requirements with respect to fire
safety, see the appendix "Distance from com-
bustible material".

Product description

1. Connection collar
2. Door
3. Latch
4. Air slide
Door lock
The appliance is supplied with the latch button (4)
installed. The door is opened by pressing in the latch
button. As the latch button becomes warm during use,
Subject to change because of technical improvements.
a glove has been supplied which you can use to pro-
tect your hand.

Installation

General preparation

1
2
3
4
09-20021-092
1. Remove the stove from the pallet by removing the
2. Remove the mounting brackets (2) by turning the
3. Reassemble the adjustable feet (3).
4. Open the door; see the following figure:
Please check the appliance immediately after deliv-
ery for damage during transport or any other dam-
age or defects. The appliance is attached to the
pallet with screws at the bottom.
If you detect transport damage or any other
damage or defects, do not use the appliance
and notify the supplier.
Remove removable parts (fire-resistant inner
plates, fire grate, top plate, ashtray) from the appli-
ance before starting installation.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
bolts (1).
adjustable feet (3) out.
1
2
3
09-20021-090
7