Materials Used - Advance OMEGA 7 24 Manuel D'utilisation

Materials used

The OMEGA 7, like all ADVANCE products, is produced as the result
of the latest developments and experience in the sport. All the materi-
als used for the paraglider have been carefully selected in order to al-
low our products an excellent longevity. The materials are systemati-
cally tested and all canopies undergo quality control testing.
Leading edge:
New Skytex 6.6 Evolution water-repellent, 9092 E117, 44 gr/m
Top & bottom surface:
New Skytex 6.6 water-repellent, 9017 E77A, 40 gr/m
Cell ribs:
New Skytex 6.6, 9092 E38A, 44 gr/m
Internal partition:
New Skytex 6.6, 9017 E38A, 40 gr/m
Reinforcement of the leading edge and trailing edge:
Polyester/Mylar, 20 mm
2
2
2
2
Reinforcement of the leading edge lower surface:
Polyamid, 16 mm
Lines:
Technora (Aramid), LTC 080 / 065/ 045, unsheathed UV coated,
•
0.7 mm / 0.65 mm / 0.55 mm (1st level)
Technora (Aramid), LTC 120/ 080/ 065, unsheathed UV coated,
•
1.1 mm / 0.7 mm / 0.65 mm (2nd level)
Technora (Aramid), LTC 200 / 160 / 120, unsheathed UV coated,
•
1.3 mm / 1.2 mm / 1.1 mm (3rd level)
Risers:
Polyester / Technora (Aramid), 13 mm - 1000 kg
Quick links:
Maillon Rapide, Inox stainless, 3.5 mm - 750 kg
53