Repair And Warranty - Megger BM80/2 Série Guide De L'utilisateur

Repair and Warranty

The instrument circuit contains static sensitive
devices, and care must be taken in handling the
printed circuit board. If the protection of an
instrument has been impaired it should not be
used, and be sent for repair by suitably trained
and qualified personnel. The protection is likely to
be impaired if, for example, the instrument shows
visible damage, fails to perform the intended
measurements, has been subjected to prolonged
storage under unfavourable conditions, or has
been exposed to severe transport stresses.
New Instruments are Guaranteed for 1 Year
from the Date of Purchase by the User.
Note: Any unauthorized prior repair or adjustment
will automatically invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for
contact:-
Megger LImited
Archcliffe Road
Dover
Kent CT17 9EN Tel: +44 (0) 1304 502243
England Fax: +44 (0) 1304 207342
OR
Megger
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown, PA 19403
U.S.A.
or an approved repair company.
Approved Repair Companies
A number of independent instrument repair
companies have been approved for repair work on
most
spare parts. Consult the Appointed Distributor /
Agent regarding spare parts, repair facilities and
advice on the best course of action to take.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for
Megger
Instruments
repair, it should be sent freight pre-paid to the
appropriate address. A copy of the Invoice and of
the packing note should be sent simultaneously by
airmail to expedite clearance through Customs. A
repair estimate showing freight return and other
charges will be submitted to the sender, if
required,
commences.
Tel: +1 (610) 676-8500
Fax: +1 (610) 676-8625
Megger
instruments, using genuine
before work on
Megger
the instrument
20